MODS

View as grid list

Sale! ADDED

Hades Clone by HCigar
~~$59.00~~ $41.30 Read More
Sale! ADDED

Hades Copper Clone by HCigar
~~$59.00~~ $41.30 Read More
Sale! ADDED

Hammer Clone by HCigar
~~$59.00~~ $41.30 Read More
ADDED

IPV 6X

Pioneer4you’s iPV 6X is the large screen variant of the iPV 400 box mod platform, repositioning the screen and adjustment buttons for easier use while maintaining the compact chassis. Integrating YiHi’s SX330 200 chipset, output of the iPV 6X sits alongside Pioneer4you’s top two battery performance devices, with an output range of 10 to 200W, an atomizer resistance range of 0.15 to 3.0 ohms. Temperature control and SX Pure compatibility output is available out of the box, with a 10 to 120J output range and a 212 to 572 degree Fahrenheit range. Ni200 Nickel, Titanium, and SS304 heating elements are also supported alongside an adjustable TCR output between 0.00050 to 0.00700 units. Maintaining the overall size and chassis design of the iPV 400, the iPV 6X moves towards a more minimalist look, featuring a more prominent colored chassis. The control face and enlarged screen are aligned vertically down the midpoint of the device, improving one handed use and adjustment. The larger OLED display now features a three line display, while increasing brightness for added visibility. Two 18650 high amperage batteries (sold separately) can be loaded from the base of the chassis, with the battery bay utilizing a sliding and spring loaded locking system. Intended to unseat the iPV 400 platform with better ergonomics and an improved screen,Pioneer4you’s iPV 6X offers one of the best performance profiles for the size and price.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

$85.00 Read More
ADDED

iPV D4 Mod

The Pioneer4You IPV D4 is the newest generation of the P4U D-series single 18650 mod. This newest version offers a cutting-edge chipset, the Yihi SX310H. You know Yihi makes wonderful chipsets. This is no exception. A reliable, sturdy, zinc metal single-cell mod you can take with you anywhere.

Yihi’s temperature control chipsets are said to be some of the best in the industry. Yihi’s platform runs on joules instead of temperature and can go up to 80 joules. In variable wattage mode, the device gets up to 80 watts, and the lowest it will go is 7 watts.

The IPV D4 is a culmination of what can be considered a generation in technology advances in the vape industry. The IPV D3 was a robust mod that was dependable, practical and at a great price. The D4 is no exception, with more features, a better chipset, and better battery economy. Yihi figured out a way to squeeze more juice out of each cell, as stand-by mode requires less battery power with the D4.

$68.00 Read More
ADDED

Joyetech eGrip II Starter Kit

The Joyetech eGrip II is the updated version of the original all-in-one Joyetech eGrip. The Joye eGrip II is considered to be an all-in-one starter kit which features a built-in battery and tank similar to the Aspire Plato and the original eGrip. The Joye eGrip II is powered by a 2100mAh built-in battery and has a 3.5ml e-Liquid capacity. The maximum output of the device can be reached up to 80 watts. The Variable Temperature Control system features support for Nickel (Ni), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Joye eGrip II also features Bypass and Temperature Coefficient of Resistance (TCR) modes. This device may be charged and download future firmware updates via the Micro USB Port.

The Joye eGrip II utilizes the Joye Cubis atomizer heads which includes the BF SS316, Ni200, Clapton and NotchCoil atomizer heads. The included NotchCoil 0.25ohm DL (Direct Lung) atomizer head provides a great vaping experience. The NotchCoil lasts much longer and can be used under high wattage conditions. The Joye eGrip II Kit also includes a BF Rebuldable Atomizer (RBA) M&L Head for vertical coil builds. The Replacement Cubis BF RBA Head is also compatible if you prefer to build your own coils. You may also use 510 threaded tanks along with the eGrip II using the included Atomizer Adapter.

The TFTA-Tank (top filling and top airflow tank) design features a convenient top fill and a top adjustable airflow valve. Atomizer heads and e-liquid may be easily refilled and replaced by removing this top section of the device. The Joye eGrip II applies two sets of battery protection circuit system which makes it more advanced and reliable. The Joye eGrip II features a large 0.96″ OLED display screen with seven different e-Liquid illumination LED lights for a beautiful and unique vaping experience. In addition to the Joye eGrip II Starter Kit, you only require e-Liquid to start vaping.

$79.00 Read More
ADDED

Joyetech eVic VTwo Mini Mod

The Joyetech eVic VTwo Mini is the updated version of the popular eVic-VTC Mini. The Joye eVic VTwo Mini features updated 4.02v firmware allows the device to fire up to 75 watts and updated temperature control modes. The Variable Temperature Control system can now offer support for Nickel (Ni), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Joye eVic VTwo Mini also features Bypass and Temperature Coefficient of Resistance (TCR) modes.

The Joye eVic VTwo Mini requires (1) high amp 18650 battery (sold separately) which may be replaced using the convenient magnetic battery door. The eVic VTwo Mini features a super large and clear OLED display screen which supports custom logos. The eVic VTwo Mini features a real time clock display which presents the current time in either dial or numerical display mode. The eVic VTwo features a dual circuit protection which applies over-charging, over-current, and over-discharging protections. This device may be charged and also download future firmware updates via the micro USB port.

$60.00 Read More
ADDED

Joyetech eVic VTwo Mini with Cubis Pro Kit

CUBIS Pro atomizer perfectly fits the new eVic VTwo Mini, having the new Firmware V4.02 supporting Custom Logo and RTC (Real Time Clock) display with clock screen protection. It is powered by interchangeable 18650 cell with magnetic cover. E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. The innovative CUBIS Pro with leak resistant cup design allows you to enjoy the best vaping experience ever.

$69.99 Read More
Sale! ADDED

King Mechanical Mod Black
~~$49.00~~ $34.30 Read More
Sale! ADDED

King Mechanical Mod Stainless
~~$51.00~~ $34.30 Read More